Crest Electronics CDVS-7000 Manuel d'utilisateur télécharger pdf (Page 109)

100

101

User Manual

i Series / iX Series 95

4.7.4 Pulse Transients

Pulse transients let you program the output to a specified value for a predetermined amount of

time. At the end of the Pulse transient, the output voltage returns to its previous value.

Parameters required to set up a Pulse transient include the pulse count, pulse period, and pulse

duty cycle. An example of a Pulse transient is shown in Figure 4-39. In this case, the count is 4,

the pulse period is 16.6 ms or 60 Hz and the duty cycle is 33%.

Figure 4-39: Pulse Transients

Note that Pulse transients can only be programmed over the bus, not the front panel. Refer to the

SCPI Programming Manual for more information about programming Pulse transients and

triggers.

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 340 341

Commentaires sur ces manuels

Pas de commentaire

Crest Electronics CDVS-7000 Manuel d'utilisateur Page 109

Commentaires sur ces manuels

Produits connexes et manuels pour Enregistreurs vidéo numériques (DVR) Crest Electronics CDVS-7000